diff --git a/Distanzhülsen.scad b/Distanzhülsen.scad
new file mode 100644
index 0000000..e3486bc
--- /dev/null
+++ b/Distanzhülsen.scad
@@ -0,0 +1,23 @@
+$fn=100;
+
+difference(){
+union(){
+cylinder(h=3, d=14);
+cylinder(h=7, d=9.9);
+}
+
+cylinder(h=8, d=8.1);
+}
+
+difference(){
+cylinder(h=2, d=30);
+    cylinder(h=2, d=26);}
+    
+  translate([30,0,0])  difference(){
+union(){
+cylinder(h=3, d=14);
+cylinder(h=7, d=9.9);
+}
+
+cylinder(h=8, d=8.1);
+}
\ No newline at end of file
diff --git a/Gehause_Badlicht.scad b/Gehause_Badlicht.scad
new file mode 100644
index 0000000..0a72e86
--- /dev/null
+++ b/Gehause_Badlicht.scad
@@ -0,0 +1,83 @@
+
+module pfosten(){
+    
+difference(){
+cube([7,7,48]);
+translate([3.5, 3.5, 41])cylinder(d=2.8, h=10);
+}}
+
+// netzteil
+*translate([37,0+33,26]) rotate([90,0,0])
+color("beige")hull(){
+cylinder(d=48, h=20);
+translate([145 - 48,0,0])cylinder(d=48, h=20);
+translate([0,-24,0]) cube([145 - 48,48, 33]);
+}
+
+
+// Platine 
+*color("blue")
+translate([110,40,4]) rotate([0,0,90])
+cube([80,100,25]);
+
+//shelly 
+*color("white")
+translate([120,50,4]) cube([34, 44, 7.2]);
+
+// Platte
+difference(){
+minkowski(){
+translate([1, 34,47]) cube([158,90, 4 ]);
+sphere(1);
+}
+union(){
+translate([0,0,0]) cube([160,125,2]);
+difference(){
+translate([0, 33,0]) cube([160,92, 50 ]);
+translate([1, 34,2]) cube([158,90, 50 ]);
+    
+   translate([-.10,50,18]) rotate ([0,90,0]) cylinder(d=9, h=3);
+    
+   translate([-.10,110,18]) rotate ([0,90,0]) cylinder(d=9, h=3);  
+     translate([-.10,100,18]) rotate ([0,90,0]) cylinder(d=9, h=3);    
+       translate([-.10,110-9,18+4.5]) rotate ([0,90,0]) cube([9,9,9]);  
+    
+       translate([158.9,60,18]) rotate ([0,90,0]) cylinder(d=9, h=3);  
+     translate([158.9,50,18]) rotate ([0,90,0]) cylinder(d=9, h=3);    
+       translate([158.9,60-9,18+4.5]) rotate ([0,90,0]) cube([9,9,9]);  
+}
+translate([1, 34, 0]) pfosten();
+translate([152, 34, 0]) pfosten();
+translate([1, 117, 0]) pfosten();
+translate([152, 117, 0]) pfosten();
+// befestigungslaschen
+
+translate([0,60,0]) difference(){
+union(){
+translate([-15, 0,0])cylinder(d=15, h=5);
+translate([-15, -7.5,0])cube([15, 15,5]);
+}
+translate([-15, 0,-.1])cylinder(d=5, h=6);
+}
+
+
+translate([160,60,0]) rotate ([0,0,180])difference(){
+union(){
+translate([-15, 0,0])cylinder(d=15, h=5);
+translate([-15, -7.5,0])cube([15, 15,5]);
+}
+translate([-15, 0,-.1])cylinder(d=5, h=6);
+}
+}}
+
+color("black")
+translate([-15, 5, 2]) {
+   text("12V", font = "Liberation Sans",  size = 10);
+}
+
+color("black")
+translate([150, 5, 2]) {
+   text("220V", size=10, font = "Liberation Sans");
+}
+
+
diff --git a/HeckablageCorsa.scad b/HeckablageCorsa.scad
new file mode 100644
index 0000000..505261a
--- /dev/null
+++ b/HeckablageCorsa.scad
@@ -0,0 +1,69 @@
+// Heckablage für Opel Corsa
+
+// 9° abgeschrägt
+
+*difference(){
+intersection(){
+rotate([-9,0,0]) cube([56.5, 17.4, 10.3]);
+
+
+cube([56.5, 20,7.4]);
+    
+}
+
+   
+ translate([ 56.5/2,15-(13.5/2),-2])  rotate([-9,0,0]) cylinder(d=13.5, h=20);
+
+ translate([ 56.5/2 - 14.3/2,-10,-2]) 
+cube([14.3, 20, 20]);
+
+ translate([ 8.1,12.3,-2])  rotate([-9,0,0]) cylinder(d=6, h=20);
+
+ translate([ 56.5-8.1,12.3,-2])  rotate([-9,0,0]) cylinder(d=6, h=20);
+ }
+ 
+ 
+ intersection(){
+     cube([100,100,14]);
+     
+ difference(){
+ union(){
+ difference(){
+union(){
+ cube([56.5, 21.8, 2.7]);
+    
+   rotate([81,0,0])  translate([ 0,1,-2.5])  cube([56.5, 21.8, 2.7]);
+ 
+  translate([ 8.1,15,0.5])  rotate([-9,0,0]) cylinder(d=5.8, h=14);
+
+ translate([ 56.5-8.1,15,0.5])  rotate([-9,0,0]) cylinder(d=5.8, h=14);
+    
+          translate([ 56.5/2,15-(13.5/2),2]) rotate([-9,0,0]) cylinder(d=12.2, h=15);
+ 
+rotate([0,0,10])translate([56.5/2-3,-7,3]) cube([9.5,10,15]);
+ 
+rotate([0,0,-10])translate([56.5/2-7,3,3]) cube([ 9.5, 10,15]);
+}
+
+    translate([ 56.5/2,15-(13.5/2),-0.1])  cylinder(d=12.8, h=3.2);
+    translate([56.5/2-12.8/2,-5,-0.1]) cube([12.8, 12.8,3.2]);
+
+
+
+//
+rotate([0,0,10])translate([56.5/2-3,-7,3]) cube([8.5,10,15]);
+// 
+rotate([0,0,-10])translate([56.5/2-6,3,3]) cube([ 8.5, 10,15]);
+
+      translate([ 56.5/2,15-(13.5/2),2]) rotate([-9,0,0]) cylinder(d=10.4, h=15);
+
+  translate([ 21.9,0,2.7]) cube([12.8, 21.8, 2]);
+ }
+ 
+
+ }
+ 
+    rotate([81,0,0])  translate([ 0,00,-0])  cube([56.5, 21.8, 7]);
+ 
+}
+}
\ No newline at end of file
diff --git a/Oszi_DS0138-case.scad b/Oszi_DS0138-case.scad
new file mode 100644
index 0000000..7d135bf
--- /dev/null
+++ b/Oszi_DS0138-case.scad
@@ -0,0 +1,24 @@
+$fn=30;
+
+use <Oszi_DS0138.scad>
+
+radius = 3;
+length  = 135;
+thick = 20;
+width = 90;
+rotate ([45,0,0])
+
+hull(){
+    translate ([radius, radius, radius]) sphere(r=radius);
+    translate ([length-radius, radius, radius]) sphere(r=radius);
+    translate ([radius, width-radius, radius]) sphere(r=radius);
+    translate ([length-radius, width-radius, radius]) sphere(r=radius);
+        
+        
+    translate ([radius, radius-thick, thick-radius]) sphere(r=radius);
+    translate ([length-radius, radius-thick, thick-radius]) sphere(r=radius);
+    translate ([radius, width-radius, thick-radius]) sphere(r=radius);
+    translate ([length-radius, width-radius, thick-radius]) sphere(r=radius);
+}
+
+platine(cutout=true);
\ No newline at end of file
diff --git a/Oszi_DS0138.scad b/Oszi_DS0138.scad
new file mode 100644
index 0000000..6f802c0
--- /dev/null
+++ b/Oszi_DS0138.scad
@@ -0,0 +1,78 @@
+$fn=30;
+
+positions = [ [96, 2.3, "Reset"], //linke untere Kante
+   [105.4, 13.9, "Sel"],
+   [105.4, 27.5, "-"],
+   [105.4, 40.2, "+"],
+   [105.4, 53.4, "OK"],
+   [6.4, 15, "X5  X2  X1"],
+   [6.4, 32.9, "OK"],
+   [6.4, 50.5, "OK"],
+   [5.2, 5.2, ""], // center des locks
+   [5.2, 71.8, ""],
+   [112, 5.2, ""],
+   [112, 71.8, ""],
+ 
+             ];
+
+module button(cutout){
+    color("black") cube([6,6, 3.8]);
+    color("silver") translate([0,0,3.8]) cube([6,6,0.3]);
+    if (!cutout){
+      color("black")translate([3,3,0]) cylinder(d=3.5, h=5);
+        }else{
+                 color("black")translate([3,3,0]) cylinder(d=8,h=25);
+            }
+}
+
+module switch(cutout){
+  color("silver") cube([13,7.4, 4.8]); 
+    if (!cutout){
+     color("black")translate([3.5,3,0])  cube([2.2,2.2, 11]);
+    }else{
+       color("black")translate([2,0.4,0])  
+        cube([9.2,6.2, 25]);
+    
+        }
+    }
+    
+    module platine(cutout){
+        // wenn cutout=true, dann wsind die Auschnitte gemeint
+difference(){
+    union(){
+        color("red") cube([117, 77, 1.8]);
+                 if (cutout)
+       translate([0,0,1.8]) color("darkred") cube([117, 77, 15]);
+    }
+         for (i=[8:11]){
+         translate([ positions[i][0],positions[i][1],-0.1]) cylinder(d=3.3, h=2);}
+         
+                  if (cutout){
+          
+                   for (i=[8:11]){
+         translate([ positions[i][0],positions[i][1],1.8]) cylinder(d=10, h=15.1);
+             }}
+}    
+    for (i=[0:4]){
+         translate([ positions[i][0],positions[i][1],1.8]) button(cutout);}
+            for (i=[5:7]){
+         translate([ positions[i][0],positions[i][1],1.8]) switch(cutout);}
+     
+
+    
+        translate([29.6, 9.2, 12.8]) union(){
+color("red") cube([71.5, 55, 1.8]);
+         color("black")translate([0,5.6,1.8])  cube([60, 43, 3]);
+          color("black")translate([65,2,-11])  cube([5, 51, 11]);
+         }
+         if (!cutout){
+      color("silver")translate([15.35,69,5+1.8]) rotate([0,90,90]) cylinder(d=11, h=22);}else{
+          color("silver")translate([15.35,77,5+1.8]) rotate([0,90,90]) cylinder(d=16, h=14); }
+         
+               color("black")translate([93,63.2,1.8])cube ([9,14, 10.8]);
+          
+     
+          }
+               
+               platine(true);
+         
\ No newline at end of file
diff --git a/Seilrolle.scad b/Seilrolle.scad
new file mode 100644
index 0000000..6af3fa7
--- /dev/null
+++ b/Seilrolle.scad
@@ -0,0 +1,40 @@
+$fn=150;
+
+
+wheel_width = 15;
+wheel_dia=75;
+
+bearing_outer_dia = 30;
+bearing_width=9;
+bearing_shoulder = 1.5;
+rope_dia = 8;
+opening_angle = 8;
+rounding_dia=3;
+
+
+rotate_extrude(angle=360){
+difference(){
+translate([0,-wheel_width/2,0])square([wheel_dia/2 , wheel_width]);
+translate([wheel_dia/2 - rope_dia/2,0,0])circle(d=rope_dia);
+    
+      
+ translate([wheel_dia/2- rope_dia/2,-rope_dia/2,0])
+    rotate([0,0,opening_angle]) square([rope_dia, rope_dia]);
+          
+ translate([wheel_dia/2- rope_dia/2,-rope_dia/2,0])
+    rotate([0,0,-opening_angle]) square([rope_dia, rope_dia]);
+    
+ translate([0,-bearing_width/2,0])square([bearing_outer_dia/2, bearing_width]);
+  translate([0,0,0])square([bearing_outer_dia/2, bearing_width]);
+  translate([0,-10,0])square([bearing_outer_dia/2 - bearing_shoulder, bearing_width]);  
+ difference(){
+translate([wheel_dia/2-rounding_dia/2,wheel_width/2 - rounding_dia,0])square([rounding_dia/2 , rounding_dia]);
+translate([wheel_dia/2-rounding_dia/2,wheel_width/2 - rounding_dia/2,0])circle(d=rounding_dia);
+}   
+
+difference(){
+translate([wheel_dia/2-rounding_dia/2,-wheel_width/2 ,0])square([rounding_dia/2 , rounding_dia]);
+translate([wheel_dia/2-rounding_dia/2,-wheel_width/2 + rounding_dia/2,0])circle(d=rounding_dia);
+}   
+}
+}
diff --git a/Seilzüge.scad b/Seilzüge.scad
new file mode 100644
index 0000000..b2616dc
--- /dev/null
+++ b/Seilzüge.scad
@@ -0,0 +1,58 @@
+cube([30,30,2000]);
+
+
+translate([60,50,1940])rotate([90,0,0])cube([30,30,800]);
+//Distanzblock vorne oben
+translate([-30,-750,1940])cube([60,30,30]);
+
+//Hantel oben
+color ("green")
+translate([-150,-750,1640])cube([300,30,30]);
+
+// rolle hinten oben
+translate ([30+7.5,7.5,1955]) rotate([0,90,0])cylinder(d=75, h=15);
+
+//rolle vorne oben
+translate ([30+7.5,-800+75,1955]) rotate([0,90,0])cylinder(d=75, h=15);
+
+// rolle unten hinten
+translate ([15,50,40]) rotate([90,0,0])cylinder(d=75, h=15);
+translate ([15,70,40]) rotate([90,0,0])cylinder(d=75, h=15);
+
+// Schrägstütze
+translate([-30,40,1940])rotate([90,0,-45])cube([30,30,350]);
+
+//rolle vordere Schrägstütze
+translate ([-75,20,1955]) rotate([0,90,-45])cylinder(d=75, h=15);
+translate ([-75-200,20-200,1955]) rotate([0,90,-45])cylinder(d=75, h=15);
+
+color("blue")
+translate ([-10,-10,605]) cube([50,50,120]);color("blue")
+translate ([43,10,665]) rotate([90,0,90])cylinder(d=75, h=15);
+color("grey")
+translate ([-30,10,665]) rotate([90,0,90])cylinder(d=55, h=25);
+
+//Schrauben
+color("red")
+translate([-15,-735,1940])cylinder(d=6, h=90);
+color("red")
+translate([75,-700,1940])cylinder(d=6, h=90);
+color("red")
+translate ([-240,-190,1940])cylinder(d=6, h=90);
+color("red")
+translate ([-70,-20,1940])cylinder(d=6, h=90);
+
+color("red")
+translate ([15,90,1700])rotate([90,0,0]) cylinder(d=6, h=90);
+color("red")
+translate ([15,90,400])rotate([90,0,0]) cylinder(d=6, h=90);
+//Hantel oben
+color ("green")
+translate([-150,-750,700])cube([300,30,30]);
+
+color("silver")
+translate ([-240,-190,100])cylinder(d=300, h=40);
+color("silver")
+translate ([-240,-190,160])cylinder(d=250, h=40);
+color("silver")
+translate ([-240,-190,220])cylinder(d=250, h=40);
diff --git a/garage_box.scad b/garage_box.scad
new file mode 100644
index 0000000..3efe99b
--- /dev/null
+++ b/garage_box.scad
@@ -0,0 +1,107 @@
+// 62.5 x 100, r 7.5
+$fn=50;
+
+module frame(width, length, radius, height){
+    x_offset = (width-2*radius)/2;
+    y_offset = (length-2*radius)/2;
+    z_offset = radius; 
+hull(){
+    translate ([x_offset,y_offset,0]) cylinder(r=radius, h=height);
+    translate ([-x_offset,y_offset,0]) cylinder(r=radius, h=height);
+    translate ([x_offset,-y_offset,0]) cylinder(r=radius, h=height);
+    translate ([-x_offset,-y_offset,0]) cylinder(r=radius, h=height);  
+
+     
+    translate ([x_offset,y_offset,z_offset]) sphere(r=radius);
+    translate ([-x_offset,y_offset,z_offset]) sphere(r=radius);
+    translate ([x_offset,-y_offset,z_offset]) sphere(r=radius);
+    translate ([-x_offset,-y_offset,z_offset]) sphere(r=radius);   
+    }
+}
+
+module loch(height, offset){
+   translate([0,0,3.4+offset])  cylinder (h=height, d=4.4);
+   translate([0,0,height+3.4+offset]) cylinder (h=3.5, d1=4.4, d2=11);
+}
+// Halter nach oben
+dicke= 5.7+7.5;
+breite = 20;
+innerebreite = 17;
+achsendurchmesser = 8;
+dia = 4.4;
+top = 9.4 +dia/2;
+right = 14 +dia/2;
+
+//
+// beweglicher Arm
+
+*translate([0,-79.5,26.5])rotate ([0,180,0]) difference(){
+union(){
+    translate([-breite/2,100+120+11,dicke]) rotate([0,90,0]) cylinder(r=dicke, h=breite);
+    
+    
+translate([-breite/2,11,0]) cube([breite,120 +100,10]);
+ translate([0,0,2])    minkowski(){
+    cylinder(d=30, h=4);
+        sphere(2);
+    }
+  }  
+    // kabelkanal
+translate([-4,-8,2]) cube([8,120 +120,7]);
+translate([-11/2,-15/2,0.8]) cube([11,15,8]);
+translate([-5,215,2]) cube([10,20,40]);
+//  Seitenscheiben
+scheibendicke = (breite - innerebreite)/2 +.1;
+  
+translate([-breite/2,100+120+11,dicke]) rotate([0,90,0]) cylinder(r=dicke+.1, h=scheibendicke);
+translate([breite/2-scheibendicke,100+120+11,dicke]) rotate([0,90,0]) cylinder(r=dicke+.1, h=scheibendicke);
+#translate([-breite/2,100+120+11,dicke]) rotate([0,90,0]) cylinder(d=achsendurchmesser, h=breite);
+}
+
+
+
+
+difference(){
+union(){
+frame(62.5, 100, 6.68, 4);
+translate([0,0,-3.5])frame(58.5, 96, 3.4, 6);
+
+
+    
+translate([-breite/2,45,0]) cube([breite,120, dicke]);
+translate([-breite/2,45+120-dicke,dicke]) rotate([0,90,0]) cylinder(r=dicke, h=breite);
+}
+translate([-innerebreite/2,45+120-dicke,dicke]) rotate([0,90,0]) cylinder(r=dicke+0.5, h=innerebreite);
+// die Achse
+translate([-breite/2,45+120-dicke,dicke]) rotate([0,90,0]) cylinder(d=achsendurchmesser+0.1, h=breite);
+// oberes und unteres Befestigungsloch
+//x:11,8 y:6.5, d=4.4
+
+translate([62.5/2- right, 100/2 - top,0.3]) loch(dicke, -6);
+translate([-62.5/2+ right, -100/2 + top,0.3]) loch(dicke, -6);
+
+// innerer Ausschnitt
+cube([ 53.5,90.5, 13], center=true);
+// Stromversorgung Ausschnitt
+translate([0,-55,3.5/2])rotate([0,90,90])cylinder(d=3.5, h=20);
+translate([0,-45,-3])cube([3.5,20, 10], center = true);
+// Kabelfürung für Taster
+translate([-innerebreite/2,45,1]) cube([innerebreite,120, dicke*2/3]);
+}
+
+
+
+*translate([-62.5/2+ right, -100/2 + top,0.3]) cube([6,6,30], center = true);
+
+*translate([-50,0, -21])cube([100, 50, 21]);
+// elektronik-box
+difference(){
+translate([0,-10, -6.5])cube([53.5,50, 29], center = true);
+translate([0,-10, -6.5])cube([51.5,48, 29.1], center = true);
+    // Stromversorgung Ausschnitt
+translate([0,-50,3.5/2])rotate([0,90,90])cylinder(d=3.5, h=20);
+translate([0,-40,-13])cube([3.5,40, 30], center = true);
+    // Ausschnitt Sensor und Tasterkabel
+translate([0,20,-7])cube([3.5,30, 30], center = true);
+
+}
\ No newline at end of file
diff --git a/garage_box_abdeckungen.scad b/garage_box_abdeckungen.scad
new file mode 100644
index 0000000..4c7d645
--- /dev/null
+++ b/garage_box_abdeckungen.scad
@@ -0,0 +1,19 @@
+$fn=50;
+translate([40,0,0]) union(){
+cylinder (d=8, h=3);
+cylinder (d=7.8, h=4.8);
+}
+
+translate([40,15,0]) union(){
+cylinder (d=8, h=3);
+cylinder (d=7.8, h=4.8);
+}
+
+
+translate([55,5,3])difference(){
+cube([10.7, 14.8, 6], center = true);
+translate([0,0,1])cube([9, 13, 5], center = true);}
+
+translate([0,0,12.5])difference(){
+cube([51.3, 47.7, 25], center = true);
+translate([0,0,1])cube([54, 45.7, 25], center = true);}
\ No newline at end of file
diff --git a/nut_profil.scad b/nut_profil.scad
new file mode 100644
index 0000000..6ca7b54
--- /dev/null
+++ b/nut_profil.scad
@@ -0,0 +1,71 @@
+$fn=50;
+
+//#cube([30,30,26], center=true);
+nut=30;
+Ra=3;
+Ri=1.4;
+Rc = 1; // Radius am Center
+Wi=19.5; // innere weite
+Wl = 8.2; // lichte weite
+heigth=25;
+
+difference(){
+hull(){
+translate([-(nut/2-Ra), -(nut/2-Ra),0])  cylinder(r=Ra, h=heigth);
+translate([-(nut/2-Ra), (nut/2-Ra),0])  cylinder(r=Ra, h=heigth);
+translate([(nut/2-Ra), -(nut/2-Ra),0])  cylinder(r=Ra, h=heigth);
+translate([(nut/2-Ra), (nut/2-Ra),0])  cylinder(r=Ra, h=heigth);
+}
+
+cylinder(d=6.8, h=25);
+
+union(){
+translate([-8.2/2, -15,0]) cube([8.2, 2.1, heigth]);
+hull(){
+translate([-Wi/2 + Ri, -(15-2-Ri) ,0]) cylinder(r=1.4, h=heigth);
+translate([+Wi/2 - Ri, -(15-2-Ri) ,0]) cylinder(r=1.4, h=heigth);
+
+
+translate([-Wl/2 + Rc, -(15-9.7+Rc) ,0]) cylinder(r=1.4, h=heigth);
+translate([+Wl/2 - Rc, -(15-9.7+Rc) ,0]) cylinder(r=1.4, h=heigth);
+}
+}
+rotate([0,0,90])
+union(){
+translate([-8.2/2, -15,0]) cube([8.2, 2.1, heigth]);hull(){
+translate([-Wi/2 + Ri, -(15-2-Ri) ,0]) cylinder(r=1.4, h=heigth);
+translate([+Wi/2 - Ri, -(15-2-Ri) ,0]) cylinder(r=1.4, h=heigth);
+
+
+translate([-Wl/2 + Rc, -(15-9.7+Rc) ,0]) cylinder(r=1.4, h=heigth);
+translate([+Wl/2 - Rc, -(15-9.7+Rc) ,0]) cylinder(r=1.4, h=heigth);
+}
+}
+
+
+rotate([0,0,270])
+union(){
+translate([-8.2/2, -15,0]) cube([8.2, 2.1, heigth]);hull(){
+translate([-Wi/2 + Ri, -(15-2-Ri) ,0]) cylinder(r=1.4, h=heigth);
+translate([+Wi/2 - Ri, -(15-2-Ri) ,0]) cylinder(r=1.4, h=heigth);
+
+
+translate([-Wl/2 + Rc, -(15-9.7+Rc) ,0]) cylinder(r=1.4, h=heigth);
+translate([+Wl/2 - Rc, -(15-9.7+Rc) ,0]) cylinder(r=1.4, h=heigth);
+}
+}
+
+rotate([0,0,180])
+union(){
+translate([-8.2/2, -15,0]) cube([8.2, 2.1, heigth]);hull(){
+translate([-Wi/2 + Ri, -(15-2-Ri) ,0]) cylinder(r=1.4, h=heigth);
+translate([+Wi/2 - Ri, -(15-2-Ri) ,0]) cylinder(r=1.4, h=heigth);
+
+
+translate([-Wl/2 + Rc, -(15-9.7+Rc) ,0]) cylinder(r=1.4, h=heigth);
+translate([+Wl/2 - Rc, -(15-9.7+Rc) ,0]) cylinder(r=1.4, h=heigth);
+}
+}
+}
+
+
diff --git a/nut_profil_Abstandhalter-backup-JsgrcnxB.scad b/nut_profil_Abstandhalter-backup-JsgrcnxB.scad
new file mode 100644
index 0000000..b10d97c
--- /dev/null
+++ b/nut_profil_Abstandhalter-backup-JsgrcnxB.scad
@@ -0,0 +1,32 @@
+$fn=50;
+
+//#cube([30,30,26], center=true);
+nut=30;
+thick = 2;
+Ra=3;
+Ri=1.4;
+Rc = 1; // Radius am Center
+Wi=19.1; // innere weite
+Wl = 8.2; // lichte weite
+deep = 9.4;
+heigth=25;
+
+difference(){
+union(){
+translate([-Wl/2, -15,0]) cube([Wl, thick+.1, heigth]);
+hull(){
+translate([-Wi/2 + Ri, -(nut/2-thick-Ri) ,0]) cylinder(r=Ri, h=heigth);
+translate([+Wi/2 - Ri, -(nut/2-thick-Ri) ,0]) cylinder(r=Ri, h=heigth);
+
+
+translate([-Wl/2 + Rc, -(nut/2-deep+Rc) ,0]) cylinder(r=Ri, h=heigth);
+translate([+Wl/2 - Rc, -(nut/2-deep+Rc) ,0]) cylinder(r=Ri, h=heigth);
+    
+
+}
+    // aussenplatte
+ translate([0,-nut/2,heigth/2])   rotate([90,0,0]) cylinder(d=heigth, h=2);
+}
+translate([0,0,heigth/2]) rotate([90,0,0])cylinder(d=8.1, h = heigth);
+
+}
\ No newline at end of file
diff --git a/nut_profil_Abstandhalter.scad b/nut_profil_Abstandhalter.scad
new file mode 100644
index 0000000..4863bbb
--- /dev/null
+++ b/nut_profil_Abstandhalter.scad
@@ -0,0 +1,52 @@
+$fn=50;
+
+//#cube([30,30,26], center=true);
+nut=30;
+thick = 2;
+Ra=3;
+Ri=1.4;
+Rc = 1; // Radius am Center
+Wi=19.1; // innere weite
+Wl = 8.2; // lichte weite
+deep = 9.4;
+heigth=25;
+
+difference(){
+union(){
+translate([-Wl/2, -nut/2,0]) cube([Wl, thick+.1, heigth]);
+hull(){
+translate([-Wi/2 + Ri, -(nut/2-thick-Ri) ,0]) cylinder(r=Ri, h=heigth);
+translate([+Wi/2 - Ri, -(nut/2-thick-Ri) ,0]) cylinder(r=Ri, h=heigth);
+
+
+translate([-Wl/2 + Rc, -(nut/2-deep+Rc) ,0]) cylinder(r=Ri, h=heigth);
+translate([+Wl/2 - Rc, -(nut/2-deep+Rc) ,0]) cylinder(r=Ri, h=heigth);
+    
+
+}
+    // aussenplatte
+ translate([0,-nut/2,heigth/2])   rotate([90,0,0]) cylinder(d=heigth, h=2);
+}
+translate([0,0,heigth/2]) rotate([90,0,0])cylinder(d=8.1, h = heigth);
+
+}
+
+translate([20,10,0])
+difference(){
+union(){
+translate([-Wl/2, -nut/2,0]) cube([Wl, thick+.1, heigth]);
+hull(){
+translate([-Wi/2 + Ri, -(nut/2-thick-Ri) ,0]) cylinder(r=Ri, h=heigth);
+translate([+Wi/2 - Ri, -(nut/2-thick-Ri) ,0]) cylinder(r=Ri, h=heigth);
+
+
+translate([-Wl/2 + Rc, -(nut/2-deep+Rc) ,0]) cylinder(r=Ri, h=heigth);
+translate([+Wl/2 - Rc, -(nut/2-deep+Rc) ,0]) cylinder(r=Ri, h=heigth);
+    
+
+}
+
+}
+translate([0,0,heigth/2]) rotate([90,0,0])cylinder(d=8.1, h = heigth);
+
+}
\ No newline at end of file
diff --git a/schleifbock.scad b/schleifbock.scad
new file mode 100644
index 0000000..9e3daf7
--- /dev/null
+++ b/schleifbock.scad
@@ -0,0 +1,9 @@
+/// Schleifbock
+difference(){
+union(){
+cylinder(d=50,h=7);
+cylinder(d=14.3, h=20);
+}
+
+cylinder(d=12.85, h=21);
+}
\ No newline at end of file
diff --git a/schliesszylinder.scad b/schliesszylinder.scad
new file mode 100644
index 0000000..abe4467
--- /dev/null
+++ b/schliesszylinder.scad
@@ -0,0 +1,7 @@
+$fn=50;
+translate([0,33/2-17.1/2,0]) cylinder(d=17.1, h = 22);
+
+translate([0,-33/2+10.1/2,0]) cylinder(d=10.1, h=22);
+translate([-10.1/2,-33/2+10.1/2,0]) cube([10.1, 20,22]);
+
+cube([25, 40, 1], center = true);
\ No newline at end of file
diff --git a/stl/Distanzhülsen.stl b/stl/Distanzhülsen.stl
new file mode 100644
index 0000000..16932b5
Binary files /dev/null and b/stl/Distanzhülsen.stl differ
diff --git a/stl/Gehause_Badlicht.stl b/stl/Gehause_Badlicht.stl
new file mode 100644
index 0000000..62fdcdb
Binary files /dev/null and b/stl/Gehause_Badlicht.stl differ
diff --git a/stl/Gehause_Badlicht_deckel.stl b/stl/Gehause_Badlicht_deckel.stl
new file mode 100644
index 0000000..73a30fe
Binary files /dev/null and b/stl/Gehause_Badlicht_deckel.stl differ
diff --git a/stl/HeckablageCorsa.stl b/stl/HeckablageCorsa.stl
new file mode 100644
index 0000000..e252123
Binary files /dev/null and b/stl/HeckablageCorsa.stl differ
diff --git a/stl/HeckablageCorsa2.stl b/stl/HeckablageCorsa2.stl
new file mode 100644
index 0000000..8875659
Binary files /dev/null and b/stl/HeckablageCorsa2.stl differ
diff --git a/stl/Laufrad.stl b/stl/Laufrad.stl
new file mode 100644
index 0000000..49ef602
Binary files /dev/null and b/stl/Laufrad.stl differ
diff --git a/stl/Seilrolle.stl b/stl/Seilrolle.stl
new file mode 100644
index 0000000..2bd336d
Binary files /dev/null and b/stl/Seilrolle.stl differ
diff --git a/stl/garage_box.stl b/stl/garage_box.stl
new file mode 100644
index 0000000..aacfbd1
Binary files /dev/null and b/stl/garage_box.stl differ
diff --git a/stl/garage_box_abdeckungen.stl b/stl/garage_box_abdeckungen.stl
new file mode 100644
index 0000000..537dc74
Binary files /dev/null and b/stl/garage_box_abdeckungen.stl differ
diff --git a/stl/garage_box_arm.stl b/stl/garage_box_arm.stl
new file mode 100644
index 0000000..b583193
Binary files /dev/null and b/stl/garage_box_arm.stl differ
diff --git a/stl/nut_profil.stl b/stl/nut_profil.stl
new file mode 100644
index 0000000..66a22bc
Binary files /dev/null and b/stl/nut_profil.stl differ
diff --git a/stl/nut_profil_Abstandhalter.stl b/stl/nut_profil_Abstandhalter.stl
new file mode 100644
index 0000000..2feac58
Binary files /dev/null and b/stl/nut_profil_Abstandhalter.stl differ
diff --git a/stl/nut_profil_Abstandhalter2.stl b/stl/nut_profil_Abstandhalter2.stl
new file mode 100644
index 0000000..86949d4
Binary files /dev/null and b/stl/nut_profil_Abstandhalter2.stl differ
diff --git a/stl/schleifbock.stl b/stl/schleifbock.stl
new file mode 100644
index 0000000..51c5f5e
Binary files /dev/null and b/stl/schleifbock.stl differ
diff --git a/stl/schliesszylinder.stl b/stl/schliesszylinder.stl
new file mode 100644
index 0000000..d8356e4
Binary files /dev/null and b/stl/schliesszylinder.stl differ
diff --git a/stl/schlitzscheibe-Körper.stl b/stl/schlitzscheibe-Körper.stl
new file mode 100644
index 0000000..2d006fd
Binary files /dev/null and b/stl/schlitzscheibe-Körper.stl differ
diff --git a/unsaved-backup-XyQItXmW.scad b/unsaved-backup-XyQItXmW.scad
new file mode 100644
index 0000000..cb69233
--- /dev/null
+++ b/unsaved-backup-XyQItXmW.scad
@@ -0,0 +1,78 @@
+// 62.5 x 100, r 7.5
+$fn=50;
+
+module frame(width, length, radius, height){
+    x_offset = (width-radius)/2;
+    y_offset = (length-radius)/2;
+    z_offset = radius; 
+hull(){
+    translate ([x_offset,y_offset,0]) cylinder(r=radius, h=height);
+    translate ([-x_offset,y_offset,0]) cylinder(r=radius, h=height);
+    translate ([x_offset,-y_offset,0]) cylinder(r=radius, h=height);
+    translate ([-x_offset,-y_offset,0]) cylinder(r=radius, h=height);  
+
+     
+    translate ([x_offset,y_offset,z_offset]) sphere(r=radius);
+    translate ([-x_offset,y_offset,z_offset]) sphere(r=radius);
+    translate ([x_offset,-y_offset,z_offset]) sphere(r=radius);
+    translate ([-x_offset,-y_offset,z_offset]) sphere(r=radius);   
+    }
+}
+
+module loch(height){
+    translate([0,0,0-3.4])  cylinder (h=height, d=4.4);
+   translate([0,0,height-3.4]) cylinder (h=3.5, d1=4.4, d2=11);
+}
+
+
+//
+// beweglicher Arm
+
+difference(){
+union(){
+    translate([-breite/2,100+120+11,dicke]) rotate([0,90,0]) cylinder(r=dicke, h=breite);
+    
+    
+translate([-breite/2,11,0]) cube([breite,120 +100,10]);
+ translate([0,0,2])    minkowski(){
+    cylinder(d=30, h=4);
+        sphere(2);
+    }
+  }  
+    // kabelkanal
+translate([-4,-8,2]) cube([8,120 +120,7]);
+translate([-11/2,-15/2,0.8]) cube([11,15,8]);
+translate([-5,215,2]) cube([10,20,40]);
+//  Seitenscheiben
+scheibendicke = (breite - innerebreite)/2 +.1;
+  
+translate([-breite/2,100+120+11,dicke]) rotate([0,90,0]) cylinder(r=dicke+.1, h=scheibendicke);
+translate([breite/2-scheibendicke,100+120+11,dicke]) rotate([0,90,0]) cylinder(r=dicke+.1, h=scheibendicke);
+#translate([-breite/2,100+120+11,dicke]) rotate([0,90,0]) cylinder(d=achsendurchmesser, h=breite);
+}
+
+
+// Halter nach oben
+dicke= 5.7+7.5;
+breite = 20;
+innerebreite = 17;
+achsendurchmesser = 8;
+#cube([62.5, 100,30], center=true);
+difference(){
+union(){
+frame(62.5, 100, 6.6, 4);
+translate([0,0,-3.2])frame(58.5, 96, 3.5, 3.2);
+
+
+    
+translate([-breite/2,45,0]) cube([breite,120, dicke]);
+translate([-breite/2,45+120-dicke,dicke]) rotate([0,90,0]) cylinder(r=dicke, h=breite);
+}
+translate([-innerebreite/2,45+120-dicke,dicke]) rotate([0,90,0]) cylinder(r=dicke+0.5, h=innerebreite);
+// die Achse
+translate([-breite/2,45+120-dicke,dicke]) rotate([0,90,0]) cylinder(d=achsendurchmesser+0.1, h=breite);
+// oberes und unteres Befestigungsloch
+//x:11,8 y:6.5, d=4.4
+
+#translate([-62.5/2,45,0]) loch(dicke);
+}
diff --git a/unsaved-backup-kOSMSqbF.scad b/unsaved-backup-kOSMSqbF.scad
new file mode 100644
index 0000000..6f802c0
--- /dev/null
+++ b/unsaved-backup-kOSMSqbF.scad
@@ -0,0 +1,78 @@
+$fn=30;
+
+positions = [ [96, 2.3, "Reset"], //linke untere Kante
+   [105.4, 13.9, "Sel"],
+   [105.4, 27.5, "-"],
+   [105.4, 40.2, "+"],
+   [105.4, 53.4, "OK"],
+   [6.4, 15, "X5  X2  X1"],
+   [6.4, 32.9, "OK"],
+   [6.4, 50.5, "OK"],
+   [5.2, 5.2, ""], // center des locks
+   [5.2, 71.8, ""],
+   [112, 5.2, ""],
+   [112, 71.8, ""],
+ 
+             ];
+
+module button(cutout){
+    color("black") cube([6,6, 3.8]);
+    color("silver") translate([0,0,3.8]) cube([6,6,0.3]);
+    if (!cutout){
+      color("black")translate([3,3,0]) cylinder(d=3.5, h=5);
+        }else{
+                 color("black")translate([3,3,0]) cylinder(d=8,h=25);
+            }
+}
+
+module switch(cutout){
+  color("silver") cube([13,7.4, 4.8]); 
+    if (!cutout){
+     color("black")translate([3.5,3,0])  cube([2.2,2.2, 11]);
+    }else{
+       color("black")translate([2,0.4,0])  
+        cube([9.2,6.2, 25]);
+    
+        }
+    }
+    
+    module platine(cutout){
+        // wenn cutout=true, dann wsind die Auschnitte gemeint
+difference(){
+    union(){
+        color("red") cube([117, 77, 1.8]);
+                 if (cutout)
+       translate([0,0,1.8]) color("darkred") cube([117, 77, 15]);
+    }
+         for (i=[8:11]){
+         translate([ positions[i][0],positions[i][1],-0.1]) cylinder(d=3.3, h=2);}
+         
+                  if (cutout){
+          
+                   for (i=[8:11]){
+         translate([ positions[i][0],positions[i][1],1.8]) cylinder(d=10, h=15.1);
+             }}
+}    
+    for (i=[0:4]){
+         translate([ positions[i][0],positions[i][1],1.8]) button(cutout);}
+            for (i=[5:7]){
+         translate([ positions[i][0],positions[i][1],1.8]) switch(cutout);}
+     
+
+    
+        translate([29.6, 9.2, 12.8]) union(){
+color("red") cube([71.5, 55, 1.8]);
+         color("black")translate([0,5.6,1.8])  cube([60, 43, 3]);
+          color("black")translate([65,2,-11])  cube([5, 51, 11]);
+         }
+         if (!cutout){
+      color("silver")translate([15.35,69,5+1.8]) rotate([0,90,90]) cylinder(d=11, h=22);}else{
+          color("silver")translate([15.35,77,5+1.8]) rotate([0,90,90]) cylinder(d=16, h=14); }
+         
+               color("black")translate([93,63.2,1.8])cube ([9,14, 10.8]);
+          
+     
+          }
+               
+               platine(true);
+         
\ No newline at end of file