$fn=30;

positions = [ [96, 2.3, "Reset"], //linke untere Kante
   [105.4, 13.9, "Sel"],
   [105.4, 27.5, "-"],
   [105.4, 40.2, "+"],
   [105.4, 53.4, "OK"],
   [6.4, 15, "X5  X2  X1"],
   [6.4, 32.9, "OK"],
   [6.4, 50.5, "OK"],
   [5.2, 5.2, ""], // center des locks
   [5.2, 71.8, ""],
   [112, 5.2, ""],
   [112, 71.8, ""],
 
             ];

module button(cutout){
    color("black") cube([6,6, 3.8]);
    color("silver") translate([0,0,3.8]) cube([6,6,0.3]);
    if (!cutout){
      color("black")translate([3,3,0]) cylinder(d=3.5, h=5);
        }else{
                 color("black")translate([3,3,0]) cylinder(d=8,h=25);
            }
}

module switch(cutout){
  color("silver") cube([13,7.4, 4.8]); 
    if (!cutout){
     color("black")translate([3.5,3,0])  cube([2.2,2.2, 11]);
    }else{
       color("black")translate([2,0.4,0])  
        cube([9.2,6.2, 25]);
    
        }
    }
    
    module platine(cutout){
        // wenn cutout=true, dann wsind die Auschnitte gemeint
difference(){
    union(){
        color("red") cube([117, 77, 1.8]);
                 if (cutout)
       translate([0,0,1.8]) color("darkred") cube([117, 77, 15]);
    }
         for (i=[8:11]){
         translate([ positions[i][0],positions[i][1],-0.1]) cylinder(d=3.3, h=2);}
         
                  if (cutout){
          
                   for (i=[8:11]){
         translate([ positions[i][0],positions[i][1],1.8]) cylinder(d=10, h=15.1);
             }}
}    
    for (i=[0:4]){
         translate([ positions[i][0],positions[i][1],1.8]) button(cutout);}
            for (i=[5:7]){
         translate([ positions[i][0],positions[i][1],1.8]) switch(cutout);}
     

    
        translate([29.6, 9.2, 12.8]) union(){
color("red") cube([71.5, 55, 1.8]);
         color("black")translate([0,5.6,1.8])  cube([60, 43, 3]);
          color("black")translate([65,2,-11])  cube([5, 51, 11]);
         }
         if (!cutout){
      color("silver")translate([15.35,69,5+1.8]) rotate([0,90,90]) cylinder(d=11, h=22);}else{
          color("silver")translate([15.35,77,5+1.8]) rotate([0,90,90]) cylinder(d=16, h=14); }
         
               color("black")translate([93,63.2,1.8])cube ([9,14, 10.8]);
          
     
          }
               
               platine(true);