imsInterface/interface/asm/test/AdapterApplication5x/AdapterApplication5x.exe.config

<?xml version="1.0" encoding="utf-8" ?>
<configuration>
  <configSections>
    <section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net" />
  </configSections>


  <startup>
    <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5"/>
  </startup>


  <appSettings>
    <!-- The name or the IP address of the OIB Core Host -->
    <add key="OIBCoreHostName" value="192.168.5.51" />

    <!--  this iTAC.OIB.Adapter should work for this line. -->
    <!--  the line Name is appended to the endpoint urls to distinguish the endpoints in oib -->
    <!--add key="LineName" value="Line1\Line1sync"/>
      <add key="LineName" value="Line4\Line 4.2"/-->
    <add key="LineName" value="Line1\Line1sync"/>
    <add key ="isSetupStation" value="false"/>

    <!-- set to true for iTAC failure analysis only -->
    <add key ="offlineMode" value="false"/>

    <!-- The listen port is the port the adapter will listen for Java connections -->
    <add key="ListenPort" value="33020"/>

    <!-- every iTAC.OIB.Adapter endpoint has a separate URL and port. together with the service name results a uniqe URL -->
    <!-- the endpoint-url may contain special characters!!! -->
    <!-- e.g. http://OibAdapterPc:33334/Itac.Oib.SetupCenterExternalControl/Line1 -->
    <add key="SiplaceProEventPort" value="9500"/>
    <add key="DisplayServiceEventPort" value="9600"/>
    <!-- default port 9600 -->
    <add key="SetupCenterNotifyPort" value="33333"/>
    <add key="SetupCenterExternalControlPort" value="33334"/>
    <add key="TraceServicePort" value="33335"/>
    <add key="MonitoringReceiverPort" value="33336"/>
    <add key="LineControlReceiverPort" value="33338"/>
    <add key="BoardGateKeeperEventPort" value="33339"/>
    <add key="DekPrinterExternalControlPort" value="33337"/>
    <add key="LinecontrolMesInterceptorPort" value="33332"/>
    <add key="ConfigurationManagerCallbackPort" value="33340"/>


    <!-- define wether messages should be logged or not. -->
    <add key="xmlExport" value="true"/>
    <add key="xmlLogging" value="true"/>
    <!-- define, which messages should be logged -->
    <add key="TraceabilityData" value="true"/>
    <add key="DownloadData" value="false"/>
    <add key="StationEventComposite" value="false"/>
    <add key="MaterialMovedReport" value="true"/>
    <add key="SetupChangedReport" value="false"/>
    <add key="FeederPlacedReport" value="false"/>
    <add key="TablePlacedReport" value="false"/>
    <add key="TableRemovedReport" value="false"/>
    <add key="BoardProcessedData" value="false"/>
    <add key="CheckInData" value="true"/>
    <add key="FeederRemovedReport" value="false"/>
    <add key="PackagingUnitConsumedReport" value="true"/>
    <add key="PackagingUnitCreatedReport" value="false"/>
    <add key="LockStateChangedReport" value="false"/>
    <add key="LineChangeoverEvent" value="true"/>
    <!-- the following two are for synchronous call on scanning packaging units -->
    <add key="PackagingUnitLocation" value="true"/>
    <add key="ExternalControlResult" value="true"/>
    <add key="BoardRequestData" value="true"/>

    <!-- maximum age for boardProcessedMessages to be processed, in 'hours:minutes:seconds' -->
    <add key="BoardProcessedDataMaxAge" value="00:30:00"/>
    <add key="StationEventMaxAge" value="02:05:00"/>

    <!-- This setting allows to stop the line if the trace data is rejected by iTac MES Suite -->
    <!-- In this case the input conveyor of the last station is stopped -->
    <add key="Asm.As.Oib.Client.Extensions.StopLineOnTraceDataRejected" value="true"/>
    <add key="Asm.As.Oib.Client.Extensions.OnVIHDataRejected.ShowMessage" value="true"/>
    <add key="Asm.As.Oib.Client.Extensions.OnVIHDataRejected.StationStop" value="true"/>
    <!-- timing values for event based mode -->
    <add key="Asm.As.Oib.Client.Extensions.ChangeoverIncompleteWarningSeconds" value="120"/>
    <add key="Asm.As.Oib.Client.Extensions.ChangeoverIncompleteRepeatWarningSeconds" value="120"/>
    <!-- from 2.3.0.2: Virtual Inkspot handling definition
      True: VirtualInkspotHandler will only request iTAC if a BarcodeFiducial is configured for the board in SiplacePro. ("Customer-Case")
      False: VirtualInkspotHandler will request iTAC always.
      Default: true -->
    <add key="Asm.As.Oib.Client.Extensions.VirtualInkspotHandlerConsidersBarcodeFiducial" value="true"/>

    <!--These are values a user can override if neccessary (for info see MSDN for binding parameters), if not provided the defaults are used-->
    <!-- <add key="Siemens.Siplace.OIB.SiplacePro.Proxies.ReliableChannel.MaxNumberOfRetryAttempts" value="1" />-->
    <!-- <add key="Siemens.Siplace.OIB.SiplacePro.Proxies.ReliableChannel.RetryFrequency" value="2000" />-->
    <!-- This is the interval in ms when the proxy checks the connection to the Service,-->
    <!-- it must be greater or equal to 1000ms; if this is not present, a default value of 1 minute is used -->
    <!-- <add key="Siemens.Siplace.OIB.SiplacePro.Proxies.ReliableChannel.CheckAliveFrequency" value="60000" />-->

  </appSettings>

  <log4net>
    <appender name="LogFileAppenderFull" type="log4net.Appender.RollingFileAppender">
      <file value=".\Log\itac.oib.proxy.full.log" />
      <appendToFile value="true" />
      <rollingStyle value="Size" />
      <maxSizeRollBackups value="10" />
      <maximumFileSize value="10MB" />
      <staticLogFileName value="true" />
      <layout type="log4net.Layout.PatternLayout">
        <header value="" />
        <footer value="" />
        <conversionPattern value="%date{dd.MM.yyyy HH:mm:ss,f} %8.10c %-5p %m%n" />
      </layout>
    </appender>
    <appender name="LogFileAppenderError" type="log4net.Appender.RollingFileAppender">
      <file value=".\Log\itac.oib.proxy.error.log" />
      <appendToFile value="true" />
      <rollingStyle value="Size" />
      <maxSizeRollBackups value="3" />
      <maximumFileSize value="10MB" />
      <staticLogFileName value="true" />
      <filter type="log4net.Filter.LevelRangeFilter">
        <levelMin value="WARN" />
        <levelMax value="FATAL" />
      </filter>
      <layout type="log4net.Layout.PatternLayout">
        <header value="" />
        <footer value="" />
        <conversionPattern value="%date{dd.MM.yyyy HH:mm:ss,f} %8.10c %-5p %m%n" />
      </layout>
    </appender>
    <appender name="ConsoleAppender" type="log4net.Appender.ColoredConsoleAppender" >
      <mapping>
        <level value="ERROR" />
        <backColor value="White" />        
        <foreColor value="Red, HighIntensity" />
      </mapping>
      <mapping>
        <level value="INFO" />
        <foreColor value="Yellow" />
        <backColor value="White" />        
      </mapping>
      <mapping>
        <level value="DEBUG" />
        <foreColor value="Blue" />
        <backColor value="White" />        
      </mapping>

      <layout type="log4net.Layout.PatternLayout">
        <header value="[Header]\r\n" />
        <footer value="[Footer]\r\n" />
        <conversionPattern value="%date{dd.MM.yyyy HH:mm:ss,f} %8.10c %-5p %m%n" />
      </layout>
      <filter type="log4net.Filter.LevelRangeFilter">
        <levelMin value="DEBUG" />
        <levelMax value="FATAL" />
      </filter>
    </appender>
    <root>
      <level value="DEBUG" />
      <appender-ref ref="LogFileAppenderFull" />
      <appender-ref ref="LogFileAppenderError" />
      <appender-ref ref="ConsoleAppender" />
    </root>
  </log4net>

</configuration>